Heat & Glo Grand-XTS Скачать руководство пользователя страница 2

Heat & Glo  •  Supreme-XTS, Grand-XTS  •  349-901 Rev. G  •  9/08

2

Congratulations

Listing Label Information/Location

Model Name: ___________________________________________ Date purchased/installed: __________________

Serial Number: __________________________________________ Location on appliance: ____________________

Dealership purchased from:  _______________________________ Dealer Phone:  __________________________

Notes: _______________________________________________________________________________________

_____________________________________________________________________________________________

Congratulations on selecting a Heat & Glo gas appliance 
—an elegant and clean alternative to wood burning 
appliances. The Heat & Glo gas appliance you have 
selected is designed to provide the utmost in safety, 
reliability, and effi ciency.

As the owner of a new appliance, you’ll want to read and 
carefully follow all of the instructions contained in this 

Owner’s Manual

. Pay special attention to all Cautions and 

Warnings.

This 

Owner’s Manual 

should be retained for future 

reference. We suggest that you keep it with your other 
important documents and product manuals.

The information contained in this 

Owner’s Manual

, unless 

noted otherwise, applies to all models and gas control 
systems.

Your new Heat & Glo gas appliance will give you years of 
durable use and trouble-free enjoyment. Welcome to the 
Heat & Glo family of appliance products!

Read this manual before installing or operating this appliance. 

Please retain this owner’s manual for future reference.

We recommend that you record the following pertinent 
information about your appliance.

Gas and Electric 
Information

Serial Number

Type of Gas

The model information regarding your specifi c appliance can be found on 
the rating plate usually located in the control area of the appliance.

Homeowner Reference Information

Model Number

He at &  Gl o, a  

 of Hearth & Ho me Te chnologies, Inc. 

20802 Kensington Boulevard, Lakeville, MN 5504 4

bran d

Not for  use  with solid  fuel .
(

Ne doit pas  entre  utilise  avec un  combustible  solide). 

This appliance  must be installed  in accordance with local  codes, if any; if not, follow  ANSI Z223.1 
in the  USA  or CAN/CG A  B149  installation  codes. 

(Installer  l’ appa re il selon  les codes  ou regl emen ts

lo caux  ou , en  l’absence  de  tels  reglements,  selon  les  codes d’in stallation  CAN/CGA-B149.) 

Ty pe   of Gas  

(Sorte De Gaz) 

:

NATURA L GAS

MADE IN US A

Minimum  Permissible  Gas  Supply for  Purpos es of Input  Adjustment .

Approved Minimum  

(De  Gaz) 

Acceptabl e

0. 0 in w. c.

(Po. Col. d’eau) 

Maximum  Pressure 

(Pression) 

0. 0 in w. c.

(Po. Col. d’eau) 

Maximum  Manifold Pressure 

(Pression) 

   0. 0 in w. c. 

(Po. Col. d’eau) 

Minimum  Manifold Pressure 

(Pression) 

   0. 0 in w. c. 

(Po. Col. d’eau) 

Mode l: 
(Modele): 

Serial 
(Serie): 

ANSI Z21X X-XXXX ·  CS A  2.XX-MXX  ·  UL307B 

XXXXXXXX 

IN CANADA 

AL TI TUDE :

0-0000  FT .

0000-0000FT .

MAX. INPU T  BTUH: 

00,000 

00,000 

MIN. INPU T  BTUH: 

00,000 

00,000 

ORIFICE  SIZE: 

#XXXXX 

#XXXXX 

XXXXXXXX 

To tal   Electrical Requirements:  000V ac,  00Hz., less than 00 Ampere s

This product may be covered by one or more of the following patents: (Nos produits sont couverts par un ou plusieurs des brevets suivants): (United States)
4593510, 4686807, 4766876, 4793322, 4811534, 5000162, 5016609, 5076254, 5113843, 5191877, 5218953, 5263471, 5328356, 5341794, 5347983, 5429495,
5452708, 5542407, 5601073, 5613487, 5647340, 5688568, 5762062, 5775408, 5890485, 5931661, 5941237, 594711 2, 5996575, 6006743, 6019099, 6048195,
6053165, 6145502, 6170481, 6237588, 6296474, 6374822, 6413079, 6439226, 6484712, 6543698, 6550687, 6601579, 6672860, 6688302B2, 6715724B2,
6729551, 6736133, 6748940, 6748942, D320652, D445174, D462436; (Canada)1297749, 2195264, 2225408; or other U.S. and foreign patents pending (ou
autres brevets americains et etrangers en attente).

Содержание Grand-XTS














































Отзывы: