Heat & Glo • Grand-I35-C, Grand-I35-SP, Supreme-I30-C, Supreme-I30-SP • 2206-901 Rev. P • 6/14
14
B. Maintenance Tasks-Service Technician
The
following tasks must be performed by a quali
fi
ed
technician.
Gasket Seal and Glass Assembly Inspection
Frequency:
Annually
By:
Service Technician
Tools needed:
Protective gloves, drop cloth and a stable
work surface.
• Inspect gasket seal and its condition.
• Inspect
fi
xed glass assembly for scratches and nicks that
can lead to breakage when exposed to heat.
• Con
fi
rm there is no damage to glass or glass frame.
Replace as necessary.
• Verify that
fi
xed glass assembly is properly retained and
attachment components are intact and not damaged.
Replace as necessary.
Logs
Frequency:
Annually
By:
Service Technician
Tools needed:
Protective gloves.
• Inspect for damaged or missing logs. Replace as necessary.
Refer to Section 12 for log placement instructions.
• Verify correct log placement and no
fl
ame impingement
causing sooting. Correct as necessary.
Firebox
Frequency:
Annually
By:
Service Technician
Tools needed:
Protective gloves, sandpaper, steel wool,
cloths, mineral spirits, primer and touch-up paint.
• Inspect for paint condition, warped surfaces, corrosion
or perforation. Sand and repaint as necessary.
• Replace appliance if
fi
rebox has been perforated.
Control Compartment and Firebox Top
Frequency:
Annually
By:
Service Technician
Tools needed:
Protective gloves, vacuum cleaner, dust
cloths
• Vacuum and wipe out dust, cobwebs, debris or pet hair.
Use caution when cleaning these areas. Screw tips that
have penetrated the sheet metal are sharp and should
be avoided.
• Remove all foreign objects.
• Verify unobstructed air circulation.
