Heat & Glo Dakota 42-CE, Руководство по установке

Страница: 19 / 36

Heat & Glo Lifestyle Collection • Dakota 42-CE • 4036-915 Rev I • 11/07 19
Note: This fi replace should be run three to four hours on the
initial start-up. Turn it off and let it cool completely. Clean
the glass. Replace the glass and run the
fi replace for an
additional 12 hours. This will help cure the products used
in the paint and logs.
• Prevent accidental fi replace operation when not
attended.
• Unplug or remove batteries from remote switch if
absent or if fi replace will not be used for an extended
period of time.
• Property damage possible from elevated
temperatures.
CAUTION
Smoke and odors are released during initial
operation.
Smoke and odors may be irritating to sensitive
individuals.
CAUTION
Fire Risk
Keep combustible materials, gasoline and
other
fl ammable vapors and liquids clear of
fi replace.
• Do NOT store fl ammable materials in the
vicinity of the fi replace.
• Do NOT use gasoline, lantern fuel,
kerosene, charcoal lighter fl uid or similar
liquids in this fi replace.
Combustible materials may ignite.
WARNING
Fire Risk
High Temperatures
Keep combustible household items away
from
fi replace.
Do NOT obstruct combustion and ventilation
air.
• Do NOT place combustible items on top
of or in front of fi replace.
• Keep furniture, draperies away from
fi replace.
WARNING
D. Frequently Asked Questions
C. After the Fireplace is Lit
Initial Break-in Procedure
When you light the fi replace, you may notice that it produces
heat which does have an associated odor or smell. If you
feel this odor is excessive it may require the initial three to
four hour continuous burn on high followed by a second burn
up to 12 hours to fully drive off any odor from paint and lubri-
cants used in the manufacturing process. Condensation of
the glass is normal
Issue Solutions
Condensation on the glass This is a result of gas combustion and temperature variations. As the fi replace warms, this condensation will
disappear.
Blue fl ames This is a result of normal operation and the fl ames will begin to yellow as the fi replace is allowed to burn for 20 to
40 minutes.
Odor from fi replace When fi rst operated, this fi replace may release an odor for the fi rst several hours. This is caused by the curing of
the paint and the burning off of any oils remaining from manufacturing.
Film on the glass This is a normal result of the curing process of the paint and logs. Glass should be cleaned within 3 to 4 hours of
initial burning to remove deposits left by oils from the manufacturing process. A non-abrasive cleaner such as gas
fi replace glass cleaner may be necessary. See your dealer.
Metallic noise Noise is caused by metal expanding and contracting as it heats up and cools down, similar to the sound produced
by a furnace or heating duct. This noise does not affect the operation or longevity of the
fi replace.