23
2 Battery
voltage too
low
Drive
inhibited
Battery charge is empty. Recharge the batteries. If the
scooter is left off for a few minutes, battery charge
may recover sufficiently to allow driving for a short
period of time.
3 Battery
voltage too
high
Drive
inhibited
Battery charge is too high. If a charger is plugged in,
unplug it or turn the Charge/Run switch to Run.
Scooters powered by RHINO will charge the batteries
when traveling down slopes or decelerating. Excessive
charging in this manner may cause this fault. Turn the
scooter power off and then back on again.
4
Current
limit
time out
Drive
inhibited
The scooter has drawn too much current for too long,
possibly because the motor has been over worked,
jammed or stalled. Turn the scooter power off, leave
for a few minutes, and then turn the power back on
again.
The controller has detected a shorted motor. Check the
loom for shorts and check the motor. Contact your
service agent.
5
Brake
fault
Drive
inhibited
Check that the park brake release lever is in the
engaged position .
The park brake coil or wiring is faulty. Check the park
brake and wiring for open or short circuits. Contact
your service agent.
6
Out
of
Neutral at
Power Up
Drive
inhibited
Throttle is not in neutral position when tuning switch
key on. Return throttle to neutral, turn power off and
back on again. Throttle may need to be re-calibrated
Check throttle wiring.
7
Speed
Pot
Error
Drive
inhibited
The throttle or its wiring is faulty. Check for open or
short circuits.
Throttle may not be correctly set up. Contact your
service agent.
8
Motor
Volts
Error
Drive
inhibited
The motor or its wiring is faulty. Check for open or
short circuits.
Contact your service agent.
9
Other
Internal
Errors
Drive
inhibited
Contact your service agent.
