HeartMath Emwave PC, Руководство пользователя

Страница: 11 / 44

11
Installing the Hardware
Make certain your computer is turned on, you have installed
the emWave PC software, and you have the following hardware:
— USB Module
— USB Ear Sensor
Step 1: Connect the ear sensor cable to the USB module and plug it
into an available USB port on your computer.
When you first connect the USB
Module to a USB port, you should
see a notification near the Win -
dows System tray in the lower
right hand corner of your screen.
This indicates that Windows has
detected the module. After the connection is established, the green
light on the USB Module is briefly illuminated while it performs a self
test. After the self test is completed, the LED light on the USB Module
goes off and remains off until you begin your session.