9
Installation
9
www.heartlandmicropayments.com
Pull the power
harness through the
service door opening
so that you have
plenty of slack to
work with.
11
Route the main interface
harness through the top
of the service door, so
that the card-reader
connector comes through
the coin-vault opening of
the meter case. Make
sure you have slack to
work with.
10
Connect the free ends of the
WaveReader transformer cable (Step
5) to the mating connectors of the
Black and Red wires of the main
interface harness from Step 8.
Polarity matching is not required
.
Note: your harness may be jacketed, if so,
make sure you use the cable that is
2-
conductor RED & BLACK.
