11
Installation
14
www.heartlandmicropayments.com
Looking inside the
service door opening,
remove the retaining
screw(s) that secure the
control board. Lift the
control board high
enough that you can see
the H7 connector a the
bottom of the board.
Attach the
Brown & Orange
wires of the WaveReader
interface harness to this connector (orange on bottom),
then re-secure the control board in the machine.
15
Attach the WaveReader to the
bracket with the four SRW-
632X.125PM screws provided.
DO NOT USE ANY OTHERS SCREWS
TO ATTACH THE READER. DOING SO
MAY DAMAGE THE READER AND
VOID THE WARRANTY!