DT10 Hardware Manual
Copyright © 2012-2014 Heartland. Data Inc.
- 21 -
5.3. Logic signal input spec.
The attached probe is needed for the logic input.
To input the logic signal, connect the GND of the target to the GND of the logic input.
A 4ch logic signal can be input at once.
Pins used for logic input.
No.
Name
Description
1
DGND
Connect to the target GND
2
DGND
Connect to the target GND
3
D1
Input for the D1 signal
4
D2
Input for the D2 signal
5
D3
Input for the D3 signal
6
D4
Input for the D4 signal
Spec. of logic input
Name
MIN.
TYP.
MAX.
UNIT
Input voltage (can be specified from 0 to 5V by application)
5
V
Sampling frequency
100
MHz
Maximum input voltage
5.5
V
