Hearthstone Quality Home Heating Products, Inc.
Tucson DX/ST Model 8702
31
Photo 26 – Log 5 Position
7. Place small tufts of the Platinum Bright Embers
on the burner and log surfaces for additional
glow as desired –
do not block burner ports
.
Photo 27 –Platinum Bright Embers
(Enlarged to
Show Detail)
Installation of the Optional Screen
To install the optional screen, you must have access
to the glass frame (for access instructions see page
15).
2. Hang screen by folded lip on top of glass frame
as shown in photo 28.
Photo 28 – Mounted Screen Detail
Removal of Log Set
CAUTION: THE LOG SET, BURNER, AND EMBERS
RETAIN HEAT AND CAN BE VERY HOT! ALLOW
2 TO 3 HOURS TO COOL AFTER PILOT LIGHT IS
TURNED OFF FOR SAFE HANDLING.
To remove the log set, follow the Installation of Log
Set instructions in the reverse order.
Completing the Installation
1. Close the firebox – reverse the firebox
access procedure outlined on page 15.
2.
Install any batteries as necessary.
Synchronize the Remote Transmitter and
Receiver if applicable to your model (see
page 39).
3. Install the Blower Assembly Kit (DX Model).
See the instructions provided with the kit.
4. Install the stone set (see page 32).