Hearthstone Quality Home Heating Products, Inc.
Stowe Model 8321
an extra 1 to 2” (25-50mm), and mark the spot to
be cut.
5. Cut the gasket at the marked spot with a utility
knife. Twist the ends slightly to prevent the
gasket from unraveling.
6. Starting at one end, wrap the gasket around the
glass. Insure a good joint where the gasket ends
meet before trimming any excess. Do not
overlap the gasket ends or leave ends with
ragged edges.
7. Place the glass back into the frame assembly
and using the rivet bracket and a 1/8” rivet
secure the glass back into the frame assembly.
8. Replace the glass frame assembly on the unit
and slide the two clips back down drawing the
glass tight against the firebox.
G
LASS
C
LEANING
As fuel gas may contain some impurities; it will be
necessary to clean the inside of the glass
occasionally. Do not use abrasive cleaners.
Scratching the glass will weaken the integrity of the
glass.
Do not clean the glass when hot!
Allow the
glass to cool and apply a mild window cleaning fluid.
Special gas appliance window cleaner is available
from your local Hearthstone dealer.
WARNING: DO NOT OPERATE THIS APPLIANCE
WITH THE GLASS PANEL REMOVED, CRACKED,
OR BROKEN. DO NOT SUBJECT THE DOOR TO
ABUSE, SUCH AS STRIKING OR SLAMMING
SHUT. REPLACEMENT OF THE GLASS PANEL
SHOULD BE DONE BY A LICENSED OR
QUALIFIED SERVICE PERSON.
NOTE:
If the vent-air system is disassembled for any
reason, re-install per the instructions provided in the
venting section of this manual.
32
