HearthStone
Quality Home Heating Products
MODEL Sterling “G” Direct-Vent
9
Log Placement Within Unit
CAUTION
Fragile! Handle the log set with care. Always wear gloves and safety goggles while handling the logs set.
Position the front and rear burner tubes in their cradles firmly. Center the ember screen directly on the front burner
tube, with the cut out set over the pilot. The rear log fits tightly to the rear of the firebox.
Note
There is one “locator” slot in the base of the rear log to aid in correct placement.
When setting the log, place the rear log over the “locator” and push log firmly against rear wall of the firebox. The
next piece to install is the front log piece. Stand this piece directly between the two burner tubes. The middle log will
now fit over the peg locators provided on the two larger logs. Open the bag of embers and place in a random pattern on
the screen. Do not place embers on or in front of the pilot.
Note
Exact positioning of the log set is required in order to obtain a pleasing flame pattern and efficient
combustion.Incorrect log placement may cause carbon build-up, excess thermal stress on the log set and stove parts,
reduced efficiency and, high levels of carbon monoxide.
Log Set Removal
To remove the log set, follow the Installation of Log Set
instructions in the reverse order.
Sterling DV Log Set Assembly
SCREEN
EMBERS
EMBER
SIDE
VIEW
MIDDLE LOG
REAR LOG
FRONT LOG
LOG LOCATOR
FRONT BURNER
TUBE
TUBE
REAR BURNER
AIR SHUTTER
Sterling DV Assembled Log Set
Sterling DV Log Set Assembly
FRONT LOG
REAR LOG
SIDE
VIEW
VIEW
FRONT
SLOT
LOCATOR
PEG
PEG
EMBER SCREEN
EMBERS
