10
Hearth & Home Technologies • Vertical Power Vent (PVV-SLP) Instructions • 4071-900 Rev. C • 11/19
Figure 3.10 Route PVI Wiring Harness
6. Position the cap right side up and attach the PVI wir-
ing harness to the wire harness bracket that came in
the manual bag. The orientation of the harness and
bracket is shown in Figure 3.12.
Figure 3.11 Attach Starting Collar
Figure 3.12 Attach PVI Wiring Harness to Bracket
Figure 3.13 Attach Wire Harness Bracket to Bottom Dish
5. Route the PVI wiring harness through the PVV-
SLEEVE starting collar and into the cap as shown in
Figure 3.10. Reattach the starting collar to the cap as
shown in Figure 3.11.
7. Attach wire harness bracket to the bottom dish of the
cap. See Figure 3.13.
SEAL HERE
