background image

5

Hearth & Home Technologies  •  IFT-RC400U User Manual  •  2564-983  •  10/20

Maintenance

Your appliance will remind you to schedule routine ser-

vice after 300 hours of Flame ON time is accumulated.   

Please contact your dealer for a 300 hour inspection to 

ensure your appliance is operating at peak performance.  
To reset the 300-hour maintenance reminder when the 

RC400 displays the following message:

1.  Wake-up your remote control display by touching 

anywhere on the touch screen.  

2.  Tap the ‘Dismiss’ Icon.  The system will reset the 

maintenance reminder.  Tap ‘Main Menu’ to return to 

the main menu.

Replace Remote Batteries

Your remote batteries are low.  Recommend immediate 

replacement before using remote to control appliance.

1.  Set the RC400 face down on flat surface when install

-

ing batteries.  DO NOT touch the screen during bat-

tery installation or removal. 

2.  Remove the battery cover from the back of the IFT-

RC400  and install the four AAA batteries in the proper 

orientation marked in the battery cavity.  Ensure the 

child lock switch adjacent to the battery cavity is in the 

UNLOCKED position.  See Figure 1.

Figure 1.  Install Batteries & Child Safety

BRAND/

BRAND/

OR

Must Replace Remote Batteries to Operate  

Appliance

INDICATORS

INDICATORS

UPDATE PIC

Содержание 2564-110










Отзывы: