background image

19

04/21

7058-805F

Figure 19.1

14.  Preparing Firebox for Non-Burn Season
• 

Frequency:

 Yearly

• 

By:

 Homeowner

a. 

Be sure the appliance is allowed to cool, has been 

unplugged and the exhaust blower is off.

b. 

Remove all ash from the firebox and 

vacuum thoroughly.

c.  Paint all exposed steel, including cast-iron.

 

Purchase paint from your local dealer.

 

— Must use a high-temperature paint made 

specifically for heating appliances.

12.  Cleaning Convection Blower - Requires No 

Lubrication

• 

Frequency:

 Yearly or more frequently depending on 

Dust/Dirt build-up

• 

By:

 Homeowner or Qualified Service Technician

a. 

Be sure the appliance is allowed to cool and has 

been unplugged.

b.  Follow section on Side Curtain Replacement on 

page 24

 for direct access to the convection blower. 

c.  Sweep or vacuum out any build-up. Use a brush or 

compressed air to loosen dirt if needed.

13.  Cleaning the Top Vent Adapter
• 

Frequency:

 Yearly or more frequently depending on  

ash build-up

• 

By:

 Homeowner

a.  The appliance must be in complete shutdown 

and the exhaust blower should be off. Allow the 

appliance to completely cool down.

b. 

Open the clean-out cover

 (Figure 19.1)

.

c.  Sweep or vacuum out any ash build-up.

Clean-Out 

Cover

Содержание Quadra-Fire PS35-C









































Отзывы: