2
Outdoor Lifestyles by Hearth & Home Technologies Inc. • Lanai 48 See Thru Installation Manual • 4113-901 Rev. D • 8/21
Safety Alert Key:
•
DANGER!
Indicates a hazardous situation which, if not avoided will result in death or serious injury.
•
WARNING!
Indicates a hazardous situation which, if not avoided could result in death or serious injury.
•
CAUTION!
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
•
NOTICE:
Used to address practices not related to personal injury.
Table of Contents
Standard Work Checklist .................................3
1 Product Specific Information
A. Appliance Certification
................................4
B. BTU Specifications
.....................................4
C. High Altitude Installations ...........................4
D. Non-combustible Materials Specification
...4
E. Combustible Materials Specification
..........4
F. Electrical Codes .........................................4
G. Fuel ............................................................4
2 Getting Started
A. Design and Installation Considerations ......5
B. Tools and Supplies Needed ........................5
C. Inspect Appliance and Components ...........6
3 Framing and Clearances
A. Appliance Dimension Diagrams .................7
B. Clearances to Combustibles
......................8
C. Vent Minimum Clearances .......................10
D. Hearth Extension/Floor Protection ........... 11
E. Stand-Alone Installation ........................... 11
F. Moisture Resistance .................................12
4 Appliance Preparation
A. Securing and Leveling Appliance .............13
B. Flashing ....................................................13
5 Electrical Information
A. Wiring Requirements ................................14
B. IntelliFire Pilot Ignition System Wiring ......14
C. Installing the Electrical ..............................14
D. Wall Switch Control Assembly
..................17
6 Gas Information
A. Valve Access ............................................18
B. Gas Pressure ...........................................18
C. Gas Connection ........................................19
D. Fuel Conversion .......................................19
E. High Altitude Installations .........................19
7 Finishing
A. Facing Material .........................................20
8 Appliance setup
A. Remove the Shipping Materials ...............22
B. Clean the Appliance .................................22
C. Optional Accessories ................................22
D. Verify Pilot Shield .....................................22
E. Install Deflection Glass
.............................22
F. Install Clear Crystal Media .......................22
G. Remove Media Placement Template ........22
9 Reference Materials
A. Accessories ..............................................23
B. Addendum ................................................24
►
►
►
►
►
►