Picture 1-2 Picture1- 3
“
Measurement”:
Enter this menu to select the measurement mode and take a
measurement.
“ GRAPH Menu”:
Enter this menu to review, delete, and lock the detected ECG
waveform and ECG quality result.
“
SET Menu”:
Enter this menu to set the Date & Time, Brightness, Beep Tone
On/Off, Automatic Power-off, Assign ECG ID Number and set
Wave Scale.
“
Data Management”:
Enter this menu to delete data.
“
Version”:
Enter this menu to review the device’s information.
2. Battery Installation
2.1
Open the battery cover on the back panel of the device.
2.2
Insert two AAA batteries as indicated by the polarity sign (refer to Picture 2-1
）
.
Picture 2-1
2.3
Replace the battery cover on the back panel of the device.
Ensure the polarity of the batteries is correct, otherwise the device will
not function correctly.
Battery life and replacement
When the “Battery power is low please replace with fresh new batteries” message
appears, replace batteries with new ones.
Always turn off the device before replacing the batteries.
Dispose of the used batteries according to the applicable local regulations.