Introduction
Important
Parts of the Healthyjuicer
Assembly and Operating Instructions
Assemble parts through into the main body of the juicer (note:
the auger bushing may already be in place.)
Slide the main body into the base stand
Stand
Clamp
Main?body
3
The Healthyjuicer is made from high quality materials. It is durable and easy
to assemble and clean. It also complies with the EEC 90/128 Migration test
and the USA FDA standard.
The specially designed auger crushes and squeezes fruits and vegetables
more efficiently than other juicers. Excess waste is neatly expelled from the
front end cap.
Handle
Screw knob
Hopper/body
Auger bushing
Auger
Nylon washer
End cap
Small screw cap
Locking base knob
Locking base
Pusher/base lever
Juice cup
Clamp
Make sure the nylon washer is in place
otherwise damage may be caused to the juicer.
The Locking knob must be disengaged before the
main body can be attached or removed.
Tip: The small screw cap is used for applying more pressure in the juicing process (for leafy
and fibrous vegetables such as parsley and wheatgrass). It is not necessary to use it for most
other fruits and vegetables. * If you are juicing very hard vegetables such as carrots, beets or
larger amounts of wheatgrass, it is recommended that the metal clamp is used.
*Please note the end cap tightens in a
counter clockwise
direction. The small end cap
tightens in a clockwise direction.
