8
V. Assembly Instructions
5.3 Install Extraction Hose
The Extraction Hose is constructed of interlocking bands that enable its length
and shape to be adjusted. Note that, the Extraction Hose will unravel if it is
lengthened or bent past its tolerance point. The diameter of the Extraction Hose
can be also adjusted by 10% by rotating sections of the hose counterclockwise.
5.3.1
Install the Extraction Hose on the unit by sliding the end of the
Extraction Hose over the Inlet Port, as shown in Fig. 3.
If the diameter of the Extraction Hose needs to be increased, rotate the
end of the hose counterclockwise.
5.3.2
Hold the end of the Extraction Hose and rotate it clockwise, to reduce
its diameter, to fit it to the diameter of the Inlet Port.
5.3.3
Position the Hose Clamp at the base of the Extraction Hose and screw
the hex nut to tighten the Hose Clamp and secure the Extraction Hose
on the Inlet Port. Ensure that the connection is tight to optimize
performance.
Fig. (3)
– Extraction Hose Installation
Hood
Inlet Port
Grill w/
LED Light
(Optional)
Extraction Hose
Hose
Clamp
