16
V. Installation Instructions
5.7 Install Articulating Extraction Arm
5.7.8 Install the preassembled 3-Joint Articulating Arm, by fitting the aluminum
360
°
Swivel Ring onto the 15” Pipe section, as shown in Fig. 10.
5.7.9 Once in place, use the holes in the aluminum ring part as a guide to drill
(3) small holes in the pipe, using a 3/16”
Æ
drill bit.
5.7.10 Screw in the (3) screws provided to secure the 360
°
Swivel Ring to the
15” Pipe, as shown in Fig. 10.
Fig. (10) – Installing 3-Joint Articulating Section
3-Joint
Articulating Arm
360
°
Swivel Ring
Screw