20
V. Installation Instructions
HA-CMSC-G2-4-W
5.14 Install Hood and Handle
Note that, there are two (2) holes on each side of the Flex Hose that are used
to install the Handle and Hood Assembly, as shown in Fig. 14.
5.14.1 Unscrew and remove the four (4) Thumb Screws from the Hood, as
shown in Fig. 14.
5.14.2 Position the Handle over the end of the Flex Hose, such that the holes
on each side of the Handle Mount align with the holes on each side of
the Flex Hose.
5.14.3 Insert the base of the Hood into the Flex Hose. Once the Hood is set
into the Flex Hose, adjust the Hood until the four (4) holes of the Hood,
Flex Hose and Handle are all aligned.
5.14.4 Insert and screw in the four (4) Thumb Screws, to secure the Hood,
Flex Hose and Handle Assembly. Partially screw in each of the four
Thumb Screws to ensure proper alignment, before screwing each in all
the way.
5.14.5 Install the LED Bulb in the LED Mount, located within the Hood.
Fig. (14)
– Assembling Hood and Flex Hose
Thumb
Screw
Handle
Mount
Hood
Handle
Flex Hose
LED Bulb
