11
V. Installation Instructions
HA-CMSC-G2-3-WS/WD
5.5 Install Inlet Tube
5.5.3 With the Inlet Tube positioned near, and aligned with, the Inlet Port,
pass the LED Cable Socket though the Inlet Tube.
5.5.4 The flange of the Inlet Tube has a three-hole cutout pattern, as shown in
Fig. 5. Align the cutouts on the flange with the three (3) Screw and
Washers that are pre-installed around the Inlet Port. Then press the
Inlet Tube flush against the Face Plate and rotate the Inlet Tube
counterclockwise to lock it in place.
5.5.5 Secure the Inlet Tube to the Face Plate by reinstalling and screwing in
the (3) Thumb Screws.
Fig. (5)
– Installing Inlet Tube on Face Plate
Inlet Tube
Cut-out on
Inlet Tube
Flange
Thumb
Screw
