1.
Power / start – stop button:
Once the air fryer is plugged in, it will beep once, then the screen will light up and
then go off. The power button will remain illuminated.
• Press the power button and hold down for 3 seconds to turn the screen on.
• Pressing the power button a second time will activate the cooking process at the
default temperature of 185°C and time of 15 minutes.
• Pressing the power button for two seconds at any time during the cooking process
will shut down the air fryer, causing the screen to display OFF. The fan will continue
running for up to 30 seconds to cool down the appliance.
2.
Internal light:
This button will help you check the cooking progress while the air fryer is in
operation.
Note:
Opening the door during the cooking process will pause the air fryer until the
door is securely closed again. The internal light will always illuminate while the door
is open.
3.
Rotation button:
Select this button when cooking with the rotisserie fork set or rolling cage. This
rotation mode can be used with any cooking pre-set program. The rotation icon will
blink while it is in use.
4.
Temperature control buttons:
Press the arrows up or down to increase or decrease the cooking temperature in 5-
degree increments.
The temperature range can be set between 65 degrees to 200 degrees on all cooking
modes, except for dehydrate.
The temperature range for dehydrate can be set between 30 degrees to 80 degrees.
5.
Timer control buttons:
Press the arrows up of down to increase or decrease the cooking time.
The cooking time can be set between 1 minute to 60 minutes on all cooking modes
except for dehydrate.
The cooking time for dehydrate can be set between 2 hours and 24 hours in 30-
minute increments.
6.
LED Digital display:
The digital display will switch between the cooking temperature and the time
remaining during the cooking process.
7 – 14: Cooking pre-sets:
Selecting any of these will set the time and temperature to a default setting for that
particular button.
You may override these pre-sets by using the timer and temperature buttons.
