Healthstream T790, Руководство по обслуживанию, Страница: 18 / 61

T790 Treadmill
How To… Replace The Running Belt and Deck
Tools Required: Allen key set, Phillips screwdriver, tape measure, rubber hammer, and open end wrench set. (All
fasteners are metric. Make sure that you have metric tools.)
2 Section 3
REMOVAL AND INSTALLATION
1. At the power switch, turn OFF the
unit, and then unplug the power
cord at the wall outlet.
2. Remove the front motor cover
screws (8) and front motor cover,
then remove the motor cover screws
(4) and washer flat (4) of the motor
cover, lift off the motor cover.
3. Loosen the motor belt tensioning
screws (2), loosen the four mounting
screws securing the motor to the
bottom of the frame.
NOTE: To remove front roller
easily, release motor belt via
loosen motor belt tensioning
screws (2) and the four mounting
screws.
4. Remove the end caps by removing
end cap bolts (4) and washer flats
(4) from each end cap.
5. Remove the fixing (R) bolts (2), side
landing fixing(R) and then side
landing assy.
6. Slide the extrusions.
7. Remove the deck guards (2) by
removing the screw2 (6) and set
aside to be remounted on the new
deck.
8. Remove the rear roller tensioning
bolts (2), flat washers (2) and star
washers (2).
9. Remove the rear roller.