Healthstream T790, Руководство по обслуживанию, Страница: 12 / 61

T790 Treadmill
OPERATING T790 CONSOLE
4 Section 2
14. After the total values are displayed twice slowly, the display will go to the beginning and ready treadmill for the next
workout. If during the display of totals, STOP is pressed, display will go directly to the beginning and ready
treadmill for the next workout.
Pre-set program display logic:
1. When one of the numerical key is pressed before workout, it means program selection. The name of the program
will display on the LCM and the program profile will display on the dot matrix. The green LED light will be on for the
number button pressed.
2. If ENTER is pressed, it means that the program is selected.
3. LCM will display “ “. The difference being, any number value can be displayed on the dot matrix while text is still
displayed on the LCM. Value on the dot matrix should flash to indicate default number can be changed.
4. LCM request for age information. If two seconds after number is entered, but ENTER is not pressed, then will
display “ENTER to confirm”. If user pressed ENTER automatically after value input, then this message does not
need to display. (Two HRC program and fitness test only)
5. LCM request for workout duration. If two seconds after number is entered, but ENTER is not pressed, then will
display “ENTER to confirm”. If user pressed ENTER automatically after value input, then this message does not
need to display.
6. LCM request for max speed or max elevation. If two seconds after number is entered, but ENTER is not pressed,
then will display “ENTER to confirm”. If user pressed ENTER automatically after value input, then this message
does not need to display.
7. LCM display “Press START to begin….”
8. If user presses START button, LCM display “GET READY” and dot matrix display will count down 3…2…1…GO
9. Treadmill will activate speed and elevation based on the pre-set program.
10. For programs, time will count down during workout in the LCM display.
11. During workout, the dot matrix will display the workout profile. Since HS preset program has 15 segments while
dot matrix has 16 columns, the entire program profile can be displayed in whole. Therefore, the current workout
segment will flash to indicate progress in workout.
12. During workout, if user changes the pre-set speed or elevation, the remaining program will scale up or down
accordingly.
LED display logic:
1. Red LED light will light up only when fan is on. If fan is off, light will not shine.
2. Red LED light will light up only when voice is on. If voice is off, light will not shine.
3. Red LED light will light up for tool indicating service is required. Once service is done, the LED light can be turned
off in the service mode.
4. Red LED light for heart will flash based on pulse rate to indicate that pulse information is being picked up. If no
pulse transmission, LED will not light up.
5. Before workout (during key entry) the number keys are used to select workout and also to enter values. During
this period, ENTER is used to confirm value input. Before ENTER is pressed, user may change value.
6. During workout, number keys = direct speed control or one touch speed control. No need to press ENTER to
confirm. If user pressed 9, then speed will change directly to 9.