background image

 

 

13

2009/11/20 Ver1.0+V1.1 

use chooses. 

 

   

 

8.

 

Programs mode

After choosing PROGRAM, adjust parameter, or press 

 

directly to 

start (It will be start by default if there is no parameter need to be adjust). 

9.

 

Workout has 32 levels in all. The setting time will be executed averagely by 32 levels. 

10.

 

During setting any parameter, you can press 

  to cancel the setting and back to the 

first parameter or program control menu. All the parameters will get back to the default 
value. 

11.

 

There are character strings to instruct the user how to operate under mode edit menu or 
parameter setting menu. 

12.

 

While running, the center menu goes contrarotate like along playground. On the bottom 
left corner will display the number of circles (LAPS). Every circle is 0.4KM (0.25MIL). 
You can switch it to project mode by touching the small picture key on the bottom right 
corner.

 

   

 

13.

 

After the program is over or under pause mode for 30 seconds, the buzzer will beep for 5 

sound and then the accumulate sport values will display in the center window and after 20 

seconds or press 

  key, it will back to standby mode.

 

 

 
 
 

Содержание HC10TVEL



































Отзывы: