15
The lower section of the display will show instruc-
tions for the selected screen. Make sure to follow
the instructions shown in the lower part of the
display.
3. Change settings as desired.
Units—The currently selected unit of measurement
will appear in the display. To change the unit of mea-
surement, press the Enter button repeatedly. To view
distance in miles, select ENGLISH. To view distance
in kilometers, select METRIC.
Demo—The console features a display demo mode,
designed to be used if the elliptical is displayed in a
store. Press the Enter button repeatedly to turn the
demo mode ON or OFF.
Contrast Level—The currently selected contrast
level will appear in the display. Press the Resistance
increase and decrease buttons to adjust the contrast
level.
Trainer Voice—The currently selected setting for
the audio coach will appear in the display. Press the
Enter button repeatedly to turn the audio coach ON or
OFF.
Default Menu—The default menu will appear when
you press the Home button. Press the Enter but-
ton repeatedly to select the manual mode or the iFit
menu as the default menu.
Check Status—The words CHECK WIFI STATUS
or CHECK USB STATUS will appear in the display.
Press the Enter button. After a few seconds, the sta-
tus of the iFit module will appear in the display. To exit
this display, press the Settings button.
Send/Receive—The words SEND/RECEIVE DATA
will appear in the display. Press the Enter button. The
console will then check for iFit workouts and firmware
downloads.
4. Exit the settings mode.
Press the Settings button to exit the settings mode.
