10
FEATURES OF THE CONSOLE
The advanced console offers an array of features
designed to make your workouts more effective and
enjoyable.
When you use the manual mode, you can change the
resistance of the pedals with the touch of a button. While
you exercise, the console will display continuous exercise
feedback. You can also measure your heart rate using
the handgrip heart rate monitor or the optional chest heart
rate monitor (see page 21 for information about the
optional chest heart rate monitor).
The console also offers a selection of onboard workouts.
Each workout automatically changes the resistance of the
pedals as it guides you through an effective workout. You
can also set a calorie, distance, or time goal.
The console also features an iFit mode that enables
the console to communicate with your wireless network
through an optional iFit module. With the iFit mode, you
can download personalized workouts, create your own
workouts, track your workout results, race against other
iFit users, and access many other features. To purchase
an iFit module at any time, go to www.iFit.com or
call the telephone number on the front cover of this
manual.
You can even connect your MP3 player or CD player
to the console sound system and listen to your favorite
music or audio books while you exercise.
To use the manual mode, see page 15. To use an
onboard workout, see page 18. To use a set-a-goal
workout, see page 19. To use an iFit workout, see
page 20. To use the sound system, see page 21. To
change console settings, see page 22.
Note: If there is a sheet of plastic on the display, remove
the plastic.
HOW TO USE THE MANUAL MODE
1. Begin pedaling or press any button on the
console to turn on the console.
When you turn on the console, the display will turn
on. The console will then be ready for use.
2. Select the manual mode.
Press the Home button or press either the Speed
button or the Calorie button repeatedly to select the
manual mode.
If a wireless iFit module is not inserted into the con-
sole and connected to iFit, the manual mode will be
selected automatically.
3. Change the resistance of the pedals as desired.
As you pedal, change the resistance of the pedals
by pressing the Resistance increase and decrease
buttons or by pressing one of the numbered
Resistance buttons.
Note: After you press a button, it will take a moment
for the pedals to reach the selected resistance level.
4. Follow your progress with the display.
The display can show the following workout
information:
Calories (Cals.)—This display mode will show the
approximate number of calories you have burned.
Calories per Hour (Cals./Hr)—This display mode
will show the approximate number of calories you are
burning per hour.
Distance (Dist.)—This display mode will show the
distance that you have pedaled in miles or kilometers.
Pulse—This display mode will show your heart rate
when you use the handgrip heart rate monitor or the
optional chest heart rate monitor (see step 5).
Resistance (Resist.)—This display mode will show
the resistance level of the pedals for a few seconds
each time the resistance level changes.
RPM—This display mode will show your pedaling
speed in revolutions per minute (rpm).
Stride—This display mode will show the total number
of strides you have pedaled.
Time—When the manual mode is selected, this
display mode will show the elapsed time. When a
workout is selected, this display mode will show the
time remaining in the workout.
The matrix offers several display tabs. Press the
Display button repeatedly until the desired tab is
shown. You can also press the increase and decrease
buttons next to the Enter button.
Speed—This tab will show a profile of the speed set-
tings of the workout. A new segment will appear at the
end of each minute.
My Trail—This tab will show a track that represents
1/4 mile (400 m). As you exercise, the flashing rect-
angle will show your progress. The My Trail tab will
also show the number of laps you complete.
