22
HOW TO USE AN IFIT WORKOUT
Note: To use an iFit workout, you must have access to
a computer with a USB port and an internet connec-
tion. In addition, you must have access to a wireless
network including an 802.11b/g/n router with SSID
broadcast enabled (hidden networks are not sup-
ported). An iFit.com membership is also required.
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 19.
2. Insert the iFit module into the console.
To insert the iFit module, see the instructions
included with the iFit module.
IMPORTANT: To satisfy exposure compliance
requirements, the antenna and transmitter in
the iFit module must be at least 8 in. (20 cm)
from all persons and must not be near or con-
nected to any other antenna or transmitter.
3. Select a user.
If more than one user is registered, you can switch
users in the iFit main screen. Press the increase
and decrease buttons next to the Enter button to
select a user.
4. Select an iFit workout.
To select an iFit workout, press one of the iFit
buttons. Before some workouts will download, you
must add them to your schedule on www.iFit.com.
Press the Map button, the Train button, or the Lose
Wt. button to download the next workout of that
type in your schedule. Press the Compete button to
compete in a race that you have previously
scheduled.
To re-run a recent iFit workout from your schedule,
first press the Track button. Next, press the in-
crease and decrease buttons to select the desired
workout. Then, press the Enter button to start the
workout.
Note: If there are no workouts of the selected type
in your schedule, the next workout in your schedule
will be downloaded.
For more information on the iFit workouts,
please see www.iFit.com.
When you select an iFit workout, the display will
show the duration of the workout, the distance you
will walk or run, the approximate number of calories
you will burn, the name of the workout, and the
maximum speed and incline settings. If you select a
competition workout, the display will count down to
the beginning of the race.
Note: Some of the iFit buttons may also run demo
workouts. To use the demo workouts, remove the
iFit module from the console and press one of the
iFit buttons.
5. Start the workout.
See step 3 on page 21.
During some workouts, the voice of an audio coach
may guide you through your workout. You can
select a setting for your audio coach (see THE
INFORMATION MODE on page 24).
To stop the workout at any time, press the Stop
button. The time will begin to flash in the display.
To resume the workout, press the Start button or
the Quick Speed increase button. The walking belt
will begin to move at the speed setting for the first
segment of the workout. When the next segment of
the workout begins, the treadmill will automatically
adjust to the speed and incline settings for the next
segment.
6. Follow your progress with the displays.
See step 5 on page 20.
7. Measure your heart rate if desired.
See step 6 on page 20.
8. Turn on the fan if desired.
See step 7 on page 20.
9. When you are finished exercising, remove the
key from the console.
See step 8 on page 20.
For more information about the iFit mode, go to
www.iFit.com.
