Healthcraft e2 STP-CM-24, Руководство пользователя

Страница: 6 / 8

English
OVERVIEW
Thank you for choosing the e2 Ceiling Mount Trapeze from HealthCraft.
Please read and understand the instructions in this manual; keep manual
for future reference. It is your responsibility to see that your e2 Ceiling
Mount Trapeze is properly assembled, installed, and cared for. Failure to
follow instructions in this manual could result in serious injury or death. If
you are not equipped to undertake the outlined work, we would
recommend that you have your e2 Ceiling Mount Trapeze installed by a
qualified contractor.
The e2 Ceiling Mount Trapeze is an over-bed trapeze system that secures
to the ceiling. The trapeze handle features two offset ladder rungs to allow
for improved use of arm strength and increased comfort. Additionally, it can
slide sideward / laterally on the ceiling mounted grab bar to store out of the
way when not in use. The e2 Ceiling Mount Trapeze is intended for
moderate vertical load bearing to provide sitting and standing support for
people with reduced mobility. The grab bar is installed to a structural
ceiling, and a metal hook is looped onto the grab bar. The trapeze handle
is connected with an adjustable strap to the metal hook. The maximum
user weight for this product is 300lbs / 136kgs. No more than 150lbs /
68kgs is to be exerted on the e2 trapeze (sitting support only). NOTE:
Product is not intended to support full body weight. The e2 Ceiling Mount
Trapeze is not to be used in any other way than described above.
LIMITED LIFETIME WARRANTY
Products are covered by a limited lifetime warranty against defects in
materials and workmanship for the original purchaser. Warranty excludes
products that have been damaged through misuse, accidental damage,
alteration, normal wear and tear, wood material and stain, or the use of
corrosive or abrasive cleaning products.
Buyer hereby indemnifies, agrees to hold harmless and defend HealthCraft
Products Inc. from and against any and all liabilities, claims, (founded and
unfounded), losses, damages, costs and expenses (including without
limitation consequential damages and reasonable professional fees)
resulting from buyers specification, application, or improper use of goods
described hereon; buyers omission or neglect. HealthCraft Products Inc.
does not assume any liability for damage resulting from services performed
by others or faulty installation, misuse or misapplication of goods sold by
HealthCraft Products Inc. HealthCraft Products Inc. shall not be liable for
prospective profits or special, indirect, or consequential damages, or for the
cost of any corrective work done without HealthCraft Products Inc. prior
approval. HealthCraft Products Inc. total liability hereunder shall in no
event exceed the purchase price of the goods specified hereon.
Specifications subject to change without notice.
HealthCraft Products Inc.
2790 Fenton Road
Ottawa, Canada
K1T 3T7
DELIVERY CONTENTS / e2 TRAPEZE CEILING MOUNT FIGURE A.
1. Grab Bar with Low Friction Strip
2. Metal Hook with Adjustable Strap
3. e2 Trapeze Handle
4. #10 x 2" Wood Screw, S/S (x6)
INSTALLATION WARNINGS FIGURE B.
1. Grab bar must be installed to ceilings that are structurally sound.
2. If desired installation location does not have adequate structure, add
wood blocking.
3. CAUTION - Do not install if structure above ceiling is unknown.
4. CAUTION - Do not install into metal studs.
5. CAUTION - Do not pull along the length of grab bar when using trapeze
handle for weight bearing. Metal hook may slide and injury may occur.
6. Only pull perpendicular to the grab bar when using the trapeze handle.
SUGGESTED CEILING MOUNT LOCATIONS FIGURE C.
To determine the optimal mounting location of the ceiling grab bar, we
recommend walking through the motions of a transfer (laying down, sitting
up, etc.). Consider the following to accommodate:
X = the rail hanging down directly over the palms of user when laying down
Y = the horizontal movement of metal hook - from overbed to storage positions
Z = the adjustable strap length so user can grab bottom rail of e2 trapeze
when laying down.
NOTE: The shorter handle of the e2 trapeze handle should be closer to
the head of the bed.
INSTALLATION FIGURE D.
1. Mark location of grab bar on ceiling.
2. Drill pilot holes for fasteners.
3. Fasten the grab bar to ceiling using appropriate fasteners.
4. Use flange covers to conceal mounting fasteners.
5. Attach e2 handle thru loop on strap.
6. Attach the metal hook onto the grab bar on ceiling.
7. Adjust strap to appropriate height for trapeze handle.
TECHNICAL DATA
See Figure E.
PRODUCT USAGE
See Figure F.
Gate 88
Kanalgatan 45B
Skellefteå, Sweden
93123
6
EC REP