Healthcraft Assista-Rail AST-S, Инструкция по эксплуатации

Страница: 6 / 9

OVERVIEW
Thank you for choosing the Assista-Rail from HealthCraft. Please read and
understand the instructions in this manual; keep manual for future
reference. It is your responsibility to see that your Assista-Rail is properly
assembled, installed, and cared for. Failure to follow instructions in this
manual could result in serious injury or death. If you are not equipped to
undertake the outlined work, we would recommend that you have your
Assista-Rail installed by a qualified contractor.
The Assista-Rail is a fixed bed rail. The Assista-Rail is intended ONLY for
minimal vertical load bearing to provide bed positioning and seating
support for people with reduced mobility. The Assista-Rail is intended for
home use. The Assista-Rail is installed between the mattress and box
spring, and is secured in place with a safety strap. The Assista-Rail is
height adjustable to accommodate the thickness of the mattress. The
maximum user weight for this product is 300lbs / 136kgs. Product is not
intended to support full body weight. The Assista-Rail is not to be used in
any other way than described above.
WARNING - PATIENT ENTRAPMENT (see additional guidelines)
The potential risk of entrapment (limb, neck, head, torso) between the bed
rail and adjacent item (i.e. mattress, headboard, sidetables, etc.) can be
reduced or avoided by the following strategies:
1. Situate the bed rail at a distance that is considerably smaller or larger
than that which could result in entrapment.
2. Consider situations that could change with time or usage such as
mattress compression, patient movement, bed position changes due to
electrically powered beds, etc.
3. Realize that this product is not intended as a physical constraint or
barrier to exiting the bed.
WARRANTY
All HealthCraft Products are covered by a one year limited warranty with
the exception of hand grips which are subject to normal wear. Buyer
hereby indemnifies, agrees to hold harmless and defend HealthCraft
Products Inc. from and against any and all liabilities, claims, (founded and
unfounded), losses, damages, costs and expenses (including without
limitation consequential damages and reasonable professional fees)
resulting from buyers specification, application, or improper use of goods
described hereon; buyers omission or neglect.
HealthCraft Products Inc. does not assume any liability for damage
resulting from services performed by others or faulty installation, misuse or
misapplication of goods sold by HealthCraft Products Inc.
HealthCraft Products Inc. shall not be liable for prospective profits or
special, indirect, or consequential damages, or for the cost of any
corrective work done without HealthCraft Products Inc. prior approval.
HealthCraft Products Inc. total liability hereunder shall in no event exceed
the purchase price of the goods specified hereon.
Specifications subject to change without notice.
HealthCraft Products Inc.
2790 Fenton Road
Ottawa, Canada
K1T 3T7
English
DELIVERY CONTENTS / PARTS FIGURE A.
1. Handle Assembly (x1)
2. Upright Tube (x2)
3. Side Tube (x2)
4. Back Tube (x1)
5. Safety Strap (x1)
6. Locking Pin (x2)
7. Bed Organizer (x1)
SAFETY CONSIDERATIONS FIGURE B.
The Assista-Rail is intended to be used when the bed casters are locked.
The Assista-Rail is intended for moderate vertical load bearing ONLY.
The Assista-Rail is not intended for sideward (lateral) support.
The Assista-Rail is not intended to support the full weight of an individual.
The Assista-Rail is not intended for children to play or hang onto.
The Assista-Rail is not to be used on electric or hospital style beds.
The Assista-Rail is not to be used with light-weight mattresses, and the
mattress must fully cover base frame.
ASSEMBLY FIGURE C.
1. Slide side tubes over back tube and engage spring locks.
2. Slide upright tubes into sides tubes and engage spring locks.
3. Slide handle assembly over upright tubes.
4. Set desired height, align holes and install locking pin.
OPTIONAL Bed Organizer
5. Loop straps around vertical tubes of rail, above top cross beam.
6. Snap button to secure bed organizer in place.
INSTALLATION FIGURE D.
1. While laying in bed, note position of waistline.
2. Slide rail between box spring and mattress, in line with waistline.
3. Loop the strap between the rail and the angle iron of the bed frame.
4. Tighten strap to pull rail tight against the side of the bed.
TECHNICAL DATA
See Figure E.
PRODUCT USAGE
See Figure F.
EC REP
Gate 88
Kanalgatan 45B
Skellefteå, Sweden
93123
6