HealthCare International RehabMill, Руководство пользователя

Страница: 25 / 32

26
Trouble Shooting
Here are some solutions for simple technical support , please identify your problem first ,then follow the
indication for fixing the problem , if they still not work , please consult to local distributor or producer for
further assistance.
Problem Possible reason Method
Treadmill doesn’t
work.
a. Unplugged Plug it into the socket
b. Safety key is not in
place. Place the safety key in place in the displayer.
c. Signal system circuit is
disconnected or connected
improperly.
Check the input signal cords of the displayer and other
signal cords.
d. Power is not turned on Check the power circuit.
e. Fuse blew out. Change for new fuse.
The moving of
running belt is not
smooth.
a. Lubrication is not
enough. Add to some lubrication.
b. Running belt is too tight Adjust the running belt.
Running belt is
slipping.
a.Running belt is too loose. Adjust the running belt
b. Driving Belt is too loose. Adjust the driving belt.
1. Running Belt Lubrication
A. After using the running belt for a period of time, the running belt must be lubricated by special lubrication.
Advice
：
Usage less than 3 times per week: once every 5 months
Usage from 4 to 7 times per week: once every 2 months
Usage more than 7 times per week: once every month
Note: Moderate volume of lubrication is needed to increase the life span of the treadmill ,not instead of
excess.
B. How to identify the timing of adding lubrication oil ?
a. After the treadmill stops and fold it up, User reaches into the center of the back of treadmill.If User
feels a little wet, showing there is still lubrication .Or User should add some lubrication into it.
b. Add the lubrication into the centre of the back of the running belt, as the following Figure: