HealthCare International PhysioTrainer, Инструкция по эксплуатации

Страница: 6 / 9

- 6 -
ASSEMBLY
Step 1
1. Use the Allen Key Bolt M8*65 (#11)
to attach the rear support tube (#09)
to the frame.
Step 2
1. Meter Assembly: Insert two AA
batteries into the back of the
display panel. Attach the
computer meter, (No.29) to the
meter stand using the (No.36)
Screws. Plug the meter cord into
the back of the display panel.
2. Pedal Assembly: Use (No.27) for
Left side and No.28 for Right side.
Each pedal crank is marked with
either an L or R. It is Important to
note that the Left side pedal is a
reverse thread which means to
tighten use a counter clockwise
rotation. After 10 hours of use
retighten both pedals and then
check periodically for tightness
*Left Pedal
– Is a Reverse Thread
Do not strip the thread!