24
Section V - Special Modes
Weight Only Mode
The BCS-G6 allows you to take weight only measurements.
To enable this measurement mode: Press
Weight Only
before stepping onto the scale.
The scale will display WGT ON. Step on the scale and press
Enter
. The display will count down
from 5 to 1 and display your weight.
To clear the weight:
Press
CLR
Athletic Mode
To qualify as “athletic”, the individual must meet the following requirements:
Work out 40 minutes in duration (20 min aerobic/20 min anaerobic), 3 days a week, for at least
the last 6 months.
To enable the Athletic Mode predictive equation:
1.
Before stepping on the scale
,
Press
7
. The screen will display: [ATH MODE Y/N?]
2.
Press the
YES
key to enable the Athletic Mode equations,
NO
to cancel.
These steps will enable the Athletic Mode for a single use. After the test is performed, the BCS-
G6 will automatically return to Standard Mode measurements.
Bodybuilder Mode
To qualify as a “bodybuilder” the individual must be at least 20% above their ideal weight (as
defined in the Metropolitan Life Height/Weight Tables), and that weight must be primarily
muscle mass.
To enable the Bodybuilder Mode predictive equation:
1.
Before stepping on the scale
,
Press
8
. The screen will display: [BB MODE Y/N?]
2.
Press the
YES
key to enable the Body Builder Mode equations,
NO
to cancel.
These steps will enable the Bodybuilder Mode for a single use. After the test is performed, the
BCS-G6 will automatically return to Standard Mode measurements.
