healthmatesauna.com
9
your health mate half sauna session
1. You can change the time and temperature during a session by pressing
the up and down arrows for either time or temperature.
2. Changes made in time or temperature will become the preset values
in the unit’s control memory. The next time your sauna is powered on, the
controller will display that time and temperature.
3. The back and lower bench heaters in the unit can be turned on and off
independently and are not controlled by the sauna’s temperature settings.
The lower bench heater is controlled by toggle switch on bench support.
4. Press and hold Power for 2 seconds to turn off the unit.
error signs
The following error codes will
display if there is a problem with
either the temperature sensor
or the unit’s wiring:
• EO: There is a problem with the temperature sensor.
• ES: There is a problem with the unit’s wiring or controller.
• HT: The unit is overheating and must be allowed to cool.
• When an error code displays, the unit’s power will be shut down
automatically for safety. If this happens, please unlug the unit.
• Wait at least 24 hours before turning the unit on again. If the problem is
not resolved, please contact customer service.
operating instructions
