Health Aqua Technology Aqua-Q, Инструкция по эксплуатации

Страница: 28 / 56

28
!
Quick coupling:
1. Cut off a suitable length of hose (approx. 5-8cm).
2. Insert the hose into the filter system‘s main water intake. You can now connect the hose to the
quick coupling. Make sure that the hose is firmly fixed into place.
3. The cold water connection coming out of the Aqua Stop should then be inserted into the other
end of the quick coupling.
Please note:
You can easily separate the quick coupling in the middle by pulling the two halves in the direction
of the arrow markings. No water will escape when you separate the coupling! You can therefore
use the quick coupling to quickly and safely uncouple the filter system from the cold water supply.
Booster pump:
The booster pump increases the water pressure of the membrane.
Warning!
When installing electrically operated attachments such as the booster pump, the risk of
electrocution can never be fully ruled out. Please therefore ensure that you observe the
following instructions:
1. Do not touch the attachments being installed or the plug with wet hands.
2. Pull the plug out of the socket before carrying out any operations with the device.
3. Make sure that you have unobstructed access to the plug socket so that you can quickly remove
the plug where necessary. Never remove the plug from the socket by pulling its cable, but instead
4. If the booster pump is faulty, do not attempt to repair it yourself. Instead you should remove
the plug from the socket and contact us.
Please note:
You must
flush out
the “Aqua-Q® “
at least once
before using it for the first time.
We recommend that you flush it out twice in order to achieve the best possible filtration results.