20
Measurement Procedure
B-1. Start a Measurement: (with Wrist Position Guide off)
With the cuff wrapped around your wrist, press
button to start measurement. All display units
appear on the screen for 1.5 seconds.
B-2. Start a Measurement:
(with Wrist Position Guide on)
1. With the cuff wrapped around your wrist, press button to start
measurement. All display units appear on the screen for 1.5 seconds.
2. Adjust the position of your wrist according to the Wrist Position
Guide symbol appears on the display. When the device senses that
your wrist is in the appropriate angle and height, the Pulse Symbol (
)
will flash with beep sound for 3 times and measurement will begin.
3. Even if the monitor is not in the ideal position after
10 seconds, the measurement will still begin. If this
occurs, the wrist symbol will appear and be stored in
the memory with the measurement.
C. After the initial inflation of the cuff, the pressure will slowly
decrease. When pulse is detected, Pulse symbol will start flashing.
Remain still and do not move until the entire measurement process is
completed. The device will detect your pulse and determine the blood
pressure.
