healingHHR787HDDigitalTerrestrialTwinTunerRecorderOperatingManual
on the Remote control to scroll down to SCAN and press the OK key on the
remote control.
z
SCAN information page will now display.
z
With this SCAN page open, you will note SEARCH Mode designation bar of
Auto and Manual.
z
Use the main Left & Right arrow keys of the remote control to select
Manual Scan.
z
Once you press Manual scan the Frequency Bar below will be highlighted.
z
Scroll down to the Frequency bar and using the LEFT main arrow key on
the remote Control; continually press the key until the existing frequency
number listed is deleted.
z
Input the TV channel frequency number that you want to scan by using the
numeric keys on the remote control.
z
Scroll down to START and press the OK key on the remote control and the
receiver will be begun to scan for the frequency.
z
As the unit scans the channel, you will see a SCAN page followed briefly by
a Search Result page which designates the search result of the number of
TV and Radio channels found in the frequency MUX.
z
Unit will now automatically revert to normal TV viewing.
I-P Time (Information Plate Time)
You can set the amount of time each
information page is displayed.
z
Press MENU on the remote control
and MAIN MENU page will appear.
z
Using the main Up/Down arrow keys
on the Remote Control scroll down to
SETTINGS.
z
Press OK and SETTINGS page will
display.
z
Scroll down to SYSTEM SETTING.
z
Press OK and SYSTEM SETTING page will display.
z
Scroll down to I.P PLATE and press OK.
z
Using the main Left & Right arrow keys, make your time selection.
Note: I-Plate time selection is 2, 4, 6, 8 or 10 seconds.
Transparency
You can set the transparency percentage in the page information plates.
24
