5.
Power LED: Illuminates when the device is connected to 5V
DC power.
6.
CATx: Connect the Transmitter output to the Receiver input
with CAT5E/6 cable. Better quality cable may permit you to
reach 60m distance.
7.
Link LED: Illuminates when the Transmitter is connected to
HDMI a source.
8.
DC 5V: Connect power supply included to Transmitter.
Connect to mains after Receiver and monitor(s) are
connected. Under no circumstances should voltage higher
than 5V be connected.
5.2 Receiver unit
1.
EQ switch: CATx cable length equalizer, set according to point
5.3 (below).
2.
HDMI out: Connects to remote display or TV HDMI input,
HDMI cable excluded.
3.
IR in: Connect the (larger) IR Receiver. Ensure remote control
and receiver in direct line-of-sight.
4.
Power LED: glows when the receiver connected to the
transmitter's Power Over Cable supply.
5.
CATx: Connect the Receiver input to the Transmitter output
with CAT5E/6 cable.
6.
Lock LED: Illuminates when the HDMI signal from the
transmitter is stable.
Содержание HDC6IRL
Страница 6: ...7 Connection diagram ...
