Headux TitanMig Pulse 2700, Руководство по эксплуатации, Страница: 58 / 72

TitanMig Pulse 2700/3500/5000 Operators Manual
Issue. A 0516 54
3.5 Add function
TMP series welding machines have preset the welding processes according to user’s requirements
before delivery, if users need to add other welding processes, please replace the softdog or enter
passwords.
Notes: Only the same capacity and type softdog can be used, users cannot change the capacity
of welding machine, otherwise the welding machine may be damages permanently.
Replace softdog: Take off the case of welding machine, find the “CFM” on the PCB1, pull out the
plug with two pins on “CFM” (it’s the softdog),replace a new one.
Enter password: Enter into the menu of start the machine, enter 4 passwords in corresponding
options, save the passwords and then exit. When you restart the welder, new processes have
been added. Details as following steps(a~e).
A. Long press and turn on the switch.
B. Press , Select “More”
C. Turn on the left. You will find Pas 1, Pas 2,Pas 3, Pas4. displayed on LED
D. Turn on the right to make the numbers the same as the codes
E. Press again. The screen would show “Finished”. Turn off the switch.
Note: The softdog and password need to buy from sellers. Please contact the vendor.