MT0404-NA2 User Manual
“General” page
①
Select control mode: RS232 COM mode (Auto COM ports detected) or TCP mode
②
List detected COM ports
③
List all Matrix devices after search operation
④
Click to search all Matrix devices that connected in same subnet
⑤
Click to configuration the selected Matrix’s TCP control configurations
⑥
Click to connect or disconnect PC and Matrix ( Connection will be established
automatically before control commands sending )
⑦
Click to refresh device status: include device information displayed in
⑨
area and
Input/output port connection status in
⑩
area.
NOTE:
Tab pages cannot be changed during control command is processing.
⑧
To enable or disable Input/output tags displaying when setting buttons on “Setting” page
focused
⑨
Device information display area
⑩
Input/output port connection status
www.hdtvsupply.com
14
HDTV Supply, Inc.