32
31
6.2.3 System Setup
The System Setup menu is PIN protected and allows the user to change the
tuning parameters of the Set Top Box if the Set Top Box is not able to achieve
Signal Lock and the TV Setup.
To access the System Setup menu the user
must first enter a 4 digit PIN number, 9871.
The user can then access the Installation
Setup sub menu.
Once the user has accessed the Installation Setup sub menu the user can then
change the Satellite Setup parameters of the TV Setup parameters.
6.2.3.1 Satellite Setup
In the unlikely event that the Set Top Box can not receive a satellite signal the
user can call Technical Support on
1-866-800-9030
can go to the AT&T
website:
http://www.cruisecast.com
If the user is instructed by Technical Support
to change the Set Top Box tuning
parameters then the use will select the
Satellite Setup screen and press “OK” on the
Remote Control Unit.
There are 7 fields that can be configured by the user to re-tune the Set Top
Box are:
1. Frequency.
2. Polorisation.
3. Chip Rate.
4. Spectral Inversion.
5. Spreading Factor.
6. Orbital Position.
7. East / West Flag.
IMPORTANT: Do not change any of the 7 parameters unless asked to do
so by a Technical support representative.
THIS SCREEN IS NOT UP TO DATE.
