HDS Systems Action Light III Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 13

background image

Factory Settings

Your light is configured at the factory with the following settings:

- Maximum setting: 1 (60 or 100 lumens)
- Primary setting: 5 or 6 (10 or 17 lumens)
- Secondary setting: 9 or 10 (2 or 4 lumens)
- Minimum setting: 15 or 16 (0.3 or 0.5 lumens)
- Force Setting: Primary setting
- Simple Momentary: off
- Tactical Momentary: off
- Automatic Button Lock: off
- Automatic Turn Off: off
- Locator Flash: off

Specifications

Voltage: 1.8V to 7.3V
Light Source: white LED
Light Output: 60 or 100 lumens maximum, 0.1 lumens minimum, visually even spacing
Regulation: constant power regulation with tint control, 20 levels
Battery Pack: 2x CR123A lithium-manganese dioxide
Runtime: 45 or 20 minutes on Maximum, 20 or 12 hours on Primary
Beam: narrow with good side spill
Housing: aerospace aluminum, military specification type III hard anodize
Lens: ultra-clear coated glass
Dimensions: 60mm by 82mm by 70mm (2.4 by 3.3 by 2.8 inches)
Weight: 170g (6 ounces) including batteries
Waterproof: 2 meters (6 feet)

Primary Features: simple single button user interface, four (4) directly accessible
brightness settings, rechargeable battery protection, reverse battery protection without
diode penalty, graceful power reduction for weak batteries, thermal regulation,
intrinsically safe design.

Settable Options: four (4) settable brightness settings, strobe emergency signal, SOS
emergency signal, locator flash, force setting, automatic button lock, automatic turn off,
simple momentary, tactical momentary.

«
...
10
11
12
13
»

Содержание Action Light III














Отзывы:

Нет отзывов

Похожие инструкции для Action Light III

Бренд: Berner Страницы: 80

Бренд: Ferei Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды