Remove the protection cover from the copper base plate and install two
H-5
rack
on the copper bottom plate using 4pcs
H-1
Install the
H-8
holder on to the tip of the two racks. Please make sure the
direction of part
H-8
is correct. Install 4pcs
H-3
into the
H-8
holder.
Apply a thin layer of thermal paste to the copper base plate.
Warning: Do not over apply thermal paste as it will decrease heat transfer efficiency.
Put the Intel CPU Bottom Rack
H-6
on the back side of the motherboard Intel
CPU socket (LGA1151/1155/1150).
Install the motherboard on the H5 bottom plate hexagonal copper stud using
A
.
Install the copper base with rack onto the motherboard. Please make sure
heatpipe slot direction is vertical to the side panel.
Tighten the four H-3 screws in even fashion. Do NOT over tighten the H-3 screw
or apply too much torque. Avoid put too much pressure on the CPU top plate.
