To install optional handle. First use 4pcs Hex Socket Cap Head M4*14mm
B
to
install the front handle from the back of the faceplate. Then use 4pcs Hex Socket
Cap Head M5*8mm
B
to mount the faceplate onto two side heatsink panel
mounting ear from the back. Use M5 HEX key Allen wrench to tighten it.
Test PC thoroughly and make sure heatsink system functions well.
Close the H3 top plate using 5pcs
C
. If the distance between two side panel is
too tight for the top plate to fit in, first loosen the screws in the red circle below,
then insert the top plate half way, tighten the screws for the heatsink system
aluminum top plate, insert the top plate in full and tighten the rest screws.
