User Manual
HDL-MCIP-RF.10
Mesh Gateway – User Manual
19
6.4 Node Configuration
This page is used to set the wireless parameters for the normal wireless devices via the
gateway, all wireless devices need to enter the wireless setup mode. It’s the preparatory
work before user can manage the wireless system, after that can start to search and
configure them as usual.
Take the wireless DLP panel as an example:
1- Click ‘Search’ button
2- You will be able to find the connected mesh gateway in ‘Mesh’ list, and the right side
displays the information of it (Band, Frequency and PSK PWD).
3- Click ‘Enter Gateway Setup Mode’ (or press the ‘PROG’ button 3 times continuously),
the RED LED will flash quickly that means the gateway enters the wireless setup mode.
4- Long press the DLP first and eighth buttons at the same time to enter the setting page,
