HDI 2100, Руководство пользователя

Страница: 4 / 23

Pump Stroke Counter
User’s Manual – 2100, Rev D | Aug 2014
4
Section 1 – Introduction
1.A General Information
This manual describes the installation, operation, and maintenance of the HDI 2100 Pump
Stroke Counter (PSC) System. This manual provides the user with all the necessary information
to properly operate the Pump Stroke Counter and perform troubleshooting and repair.
The HDI 2100 PSC, like all of HDI’s core products, have three (3) key elements: the Control
Head, a Sensor Assembly specified by the end client, and the Cable Assembly connecting the
Control Head to the Sensor Assembly. These items will be discussed at greater detail in Section
2.
1.B Unpacking and Inspection
Upon receipt of the equipment, it is critical to confirm all the necessary items are accounted as
some items can settle to the bottom of the box or be thrown out/misplaced if previously inspected
by a freight forwarder or third party (Customs) during transit. If any items are missing, contact
the freight forwarder or third party. If there are still missing items, please contact HDI.
1.C Cautionary Information
Power
This system is typically configured with an internal power pack and dry contact sensors that will
be damaged if tested or connected to a 24VDC system without proper modifications from HDI.
Exposed Electronics
Caution: Do not leave the equipment out and unconnected (open cables or display) as this may
expose the connector leads to moisture and outside elements damaging the electronics.
Returns
Proper protection of the equipment should be a top priority when returning the equipment back to
HDI or an authorized agent for repair. Additionally, the shipper must ensure all equipment
clears all Customs duties and inspection as different agencies may hold equipment without
notifying HDI.