Disclaimer:
3
rd
party and/or custom firmware providing extra features are not covered in this manual.
31
4K Vertex² – User Manual
[OSD SETUP]:
Enable or Disable the OSD feature of Vertex².
[OSD FADE]:
Set the timer in seconds before OSD fade out, 0 = never (always ON)
[OSD LOCATION X, Y]:
Set the X and Y value of the OSD location at 1080p, values are multiplied by 2
when the stream is 4K.
[OSD COLOR FRONT, BACK, LEVEL]:
Set the Text Color [FRONT 0-31], Background Color [BACK 0-31] and
Background transparency [LEVEL 0-7] for the OSD.
[OSD INFO]:
Select or unselect the information that must be displayed on your Vertex² OSD. Available
options are: Source name, Video Field, Video IF, HDR info, HDR IF, Audio field, RX Video info, RX HDR
info, Ignore Metadata Change.
[OSD MASK SETUP]:
Enable of Disable the use of OSD Mask.
[MASK LOCATION x0,y0,x1,y1]:
Defines the coordinates of the top left and bottom right corner of your
OSD Mask at 1080p. Values are multiplied by 2 when the stream is 4K
[OSD MASK LEVEL]:
Select the level of transparency for your OSD Mask. Value range is from 1 to 7.
[OSD GRAYSCALE]:
Select the level of grayscale for your OSD Mask. Value range is from 0 to 15.
[SEND]:
For any changes in the above parameters, click SEND to upload them to your Vertex² unit.
[OSD TEXT ENABLE]:
Enable or disable the OSD Custom Text, once activated, the custom text defined in
the text field will be displayed on screen.
[NEVER FADE]:
If you want to keep the OSD Custom text even after OSD info faded away, make sure this
option is enabled.
[OSD TEXT X,Y]:
Set the X and Y value of the OSD Custom Text at 1080p, values are multiplied by 2
when the stream is 4K
[SEND]:
For any changes in the above parameters, click SEND to upload them to your Vertex² unit.
[REFRESH]
: Refresh the current page.
