9
ACCESSORIES
PT-VDET PROOF TESTER
®
FOR
V-DETECT AC VOLTAGE DETECTOR
The PT-VDET Proof Tester Voltage Detector Tester is for use on the V-DETECT AC Voltage
Detector. This tester generates high voltage AC for testing the V-DETECT AC Voltage
Detector. To use, turn on the V-DETECT Detector and set it for the lowest range, hold
the Tester in one hand and the V-DETECT Detector in the other. Apply
the top of the V-DETECT Detector to the metal end plate
on the Tester. Press and hold the TEST button on the Tester.
A properly operating V-DETECT AC Voltage Detector
will indicate voltage with continuous flashing lights and
beeping sound. For best results, hold the PT-VDET
with a tight grip and wrap your fingers around it.
If the V-DETECT AC Voltage Detector does
not indicate voltage, do not use it and return it
to HD Electric Company for service.
CAUTION:
This Tester generates high voltage
AC for testing V-DETECT AC Voltage Detectors.
There is no danger of electric shock when this
tester is used as directed. Discontinue use and
return to HDE for service if the housing is cracked
or broken, or if the battery cover is lost.
CAUTION: High Voltage
WARNING:
Do not use this tester except as directed.
Do not use to test equipment other than specified
V-DETECT AC Voltage Detectors. Do not apply to energized circuits or equipment.
Do not operate this Tester without the battery cover and do not open the housing. Refer
all servicing to the factory. Failure to follow these instructions may lead to electric shock,
severe injury or death.
MAINTENANCE AND CARE
STORAGE
- It is recommended for protection that the instrument and its accessories
are stored in the carrying bag or case.
CLEANING INSTRUCTIONS
- To clean, wipe with a damp cloth with water.
Do not use harsh chemicals or solvents.
CLEANLINESS
- The molded housing is very rugged, but it should be kept clean and free
of dirt, grease and any other foreign materials. If the housing surface integrity has been
compromised in any way, remove from service and return to factory for repair or replacement.
DAMAGE
- If you suspect any mechanical or electrical damage, do not use the
instrument and arrange for repair by returning to the factory.
CALIBRATION & TESTING
- Regular calibration is not required.
There is no calibration adjustment.
SERVICE
- Return to HD Electric Company for service.
MANUFACTURING LOCATION -
HD Electric Company • Waukegan, IL. 60085, USA