4
IMPORTANT SAFETY INFORMATION
Read and understand these instructions prior to use. These operating instructions
are not a substitute for proper training in the use of this equipment.
• Only trained, professional operating personnel should use the instrument.
The voltages this instrument operates at are dangerous and lethal. Severe
injury or death can occur if improperly used.
• Risk of electrocution is inherent in or around high voltage.
• Always use proper high voltage procedures, including personal protective equipment,
when working near or around high voltage equipment or conductors.
• Do not exceed the maximum voltage rating.
• The V-DETECT AC Voltage Detector must be used with a hot stick
of the appropriate length for the voltage being measured per your company
and OSHA published requirements.
• Do not touch the instrument during use. The housing should be considered to be
at the same voltage as the conductor.
• Prior to using, inspect the instrument for any physical damage, cleanliness and check
for proper working order by pressing the ON button and checking that all voltage
range lights turn on in turn and that the unit stays on following the self test.
• Never allow another high voltage or grounded conductor to contact the instrument
during use. Keep the housing free and clear of all structures at all times.
• Bridging the housing from line-to-ground or line-to-line may cause a fault and arc.
• The V-DETECT AC Voltage Detector does not detect voltages less than the lowest
voltage range setting on the instrument. Always use proper safety procedures.
• Lack of a voltage indication does not
mean the conductor is dead or grounded.
• Grounded equipment or lines can
appear to be live when in close
proximity to energized conductors.
• The V-DETECT AC Voltage Detector
is a proximity sensing device. Voltage detection
distance is not affected by insulation on
conductors such as on tree wire or spacer wire.
• Voltage readings are sensitive to
geometry. Read and understand the
HOW TO USE IT section of this manual
(page 5) before using the instrument.
• The instrument detects AC voltage only.
It does not detect DC voltage such as
charged capacitors or cable.
Read and understand the labeling on
the product before proceeding.