2
IMPORTANT SAFETY INFORMATION
Read and understand these instructions prior to use. These operating instructions are not
a substitute for proper training in the use of this equipment. High voltage systems present
serious hazards, including the risk of death or serious injury due to arcing, thermal burns
and electrocution. HD Electric’s products are intended solely for use by professionals with
knowledge, training and experience in the use of the equipment and its accessories in and
around high voltage systems.
All applicable federal, state, company and OSHA work practices must be followed.
If you are unfamiliar with the work practices required,
DO NOT PROCEED.
Call HD Electric Company if you have any questions regarding this equipment.
THESE IMPORTANT LABELS ARE AFFIXED TO THE PRODUCTS.
READ AND UNDERSTAND EACH OF THEM BEFORE PROCEEDING.
All meters require the use of accessory hotsticks, which may or may not be supplied with
the meter. The minimum hotstick length required for safe use depends upon the particular
operation; consult federal, state, company or OSHA specifications for the proper hotstick
length for the intended operation.
The users of this meter should always be equipped with personal protective equipment
including high voltage gloves, flame retardant clothing, eye and face protection. Some
applications may require additional protective equipment.
Accessory probes are available. Always use the proper probe(s) for your application.
Failure to follow these and other warnings and safety precautions may result in severe
injury or death.
W A R N I N G
W A R N I N G
HOT STICK REQUIRED
DANGER
Keep Connecting Cord
Free and Clear of Everything
At All Times During Operation.
#VMCWL-96
See Instructions
DANGER
ELECTRIC SHOCK HAZARD
ELECTRICAL ARC HAZARD
READ INSTRUCTIONS AND OPERATIONS
MANUAL BEFORE USE
Always wear personal protective equipment including eye and face
protection, insulating gloves and FR clothing.
All OSHA and company work practices must be followed.
Always maintain proper working clearances.
Use only HD Electric probes appropriate and intended for the work
to be performed.
This product is designed for use by professionals trained in its use
and application in and around high voltage electrical equipment. If
you are not trained in the work methods required for safe operation,
DO NOT PROCEED until you obtain the proper training.
Failure to follow these recommended practices may result in severe
burns, serious injury or death.
HD Electric Company
www.hdelectriccompany.com Phone: (847) 473-4980
NOTICES
-
This product is designed for use by professionals trained in its use and application
in and around high voltage electrical equipment. If you are not trained in the work methods
required for safe operation, do not proceed until you obtain the training
.
CAUTIONS
-
This product was tested before leaving the factory but it must be inspected prior
to and after each use for proper working condition. All fiberglass was tested per OSHA at
100kV/ft./5 min. Be aware that dirt, moisture, mechanical fatigue and other factors reduce
the dielectric strength of the product. If any defect or condition is noted, do not use this product. Re-
move from service and arrange for repair.
WARNINGS
-
Rigorous hot stick work precautions and all OSHA and company work practices
must be followed. Always wear approved cover-up and safety equipment. Read and understand
instructions prior to use. Misuse and abuse of this product can lead to severe injury or death.
NOTICES - CAUTIONS - WARNINGS
GPWL-0399
!
!
!
!
!
HD ELECTRIC COMPANY
1 4 7 5 L A K E S I D E D R I V E • W A U K E G A N , I L L I N O I S 6 0 0 8 5 U . S . A .